I have updated HP Insight Management WBEM Providers for Windows Server 2003/2008 x64 Editions from v2.7.0.0 to v2.8.0.0 and I have launched the config/repair agent for WBEM. HP Insight Management WBEM Providers 10.10 for Microsoft® Windows® Data Sheet Abstract. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial.
HP Insight Management WBEM Providers for Windows Server x64 Editions
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Software - System Management
Version:
10.30.0.0(1 Oct 2015)
Operating System(s):
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2008 R2
File name:
cp026878.exe (14 MB)
The HP Insight Management WBEM Providers supply system management data through the Windows Management Instrumentation framework for HP ProLiant server platforms and options. The Insight Providers offer industry standard DMTF SMASH profile and SNIA SMI-S profile compliance.
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.10.0.
Prerequisites:
The HP Insight Management WBEM Providers version 10.30.0.0 require storage, network, system management controller, and Lights-Out interface drivers from Service Pack for ProLiant 2015.10.0.
In addition, the System Management Homepage (SMH) component is required for a single server web-based user interface.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Place the Smart Component in a temporary directory, then double-click it to run.
Select 'Install' to start extracting to a temporary location on the hard drive.
Click the 'Install' button to perform the installation.
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Version:10.75.0.0 (2 Apr 2019)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixed the incorrect System Management Homepage red icon status of Smart Array controllers, if the controller has logical drive(s) created with HPE Smart Storage Administrator version later than 3.10.3.0.
Version:10.71.0.0 (27 Nov 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Implemented a workaround to fix errors seen with Hyper-V commands after WBEM Providers are installed under Microsoft Windows Server 2012 R2 and Microsoft Windows Server 2016.
Refer to the following Customer Advisory for more info on the issue and workaround: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00053606en_us
Fixed an application error seen upon querying data from HPE Network WBEM Providers, on systems with Broadcom NIC devices using bmapia.dll.
Version:10.70.0.0 (5 Feb 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixed a handle leak caused by Storage provider (hpwmisa.dll).
Version:10.65.0.0 (12 Jul 2017)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
none
Applied a SHA-256 digital signature to the WBEM Providers MSI file as well as all the binary files contained in it.
Allowed installation to proceed on systems with the Windows Remote Registry service disabled.
Version:10.61.0.0 (21 Apr 2017)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
None
Applied a SHA-256 digital signature to the WBEM Providers MSI file as well as all the binary files contained in it.
Allowed installation to proceed on systems with the Windows Remote Registry service disabled.
Version:10.60.0.0 (24 Oct 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixed the issue with Insight Management WBEM override rootinterop namespace for Hyper-V.
50% slow performance/backup issue with HP Ultrium/LTO polling issues.
Tape backup fails randomly (irrespective of any server or controller/backup software) when HPE Insight Management WBEM Providers is upgraded to version 10.X.
Providers are causing spare drives to be spun up every few minutes.
Added support for Microsoft Windows Server 2016 and other new ProLiant servers and options.
Version:10.40.0.0 (1 Apr 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2016.03.0.
Version:10.30.0.0 (1 Oct 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.10.0.
Version:10.20.0.0 (15 Jun 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.06.
Version:10.10.0.0 (30 Mar 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.03.
Added support for HP SUM Version 7.2.
Added verbose logging in Windows.
Version:10.0.0.0 (9 Sep 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enable option to include/exclude Fiber Channel Port status
Host Bus Adapter mode reporting for Smart Array Controllers
Version:9.5.0.0 (18 Feb 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for Unified Extensible Firware Interface Platforms
Encryption status reporting for Smart Array controllers
Version:9.4.0.0 (10 Sep 2013)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Ipv6 for iLo
iSCSI
Version:9.3.0.0 (19 Feb 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
To report Rank,Techonology,Operating and minimum voltage for DIMM's
Version:9.2.5.0 (26 Oct 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for HP Smart Memory and new memory related properties.
Version:9.2.0.0 (4 Sep 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Provider License related information for certain Smart Array cards.
Report Smart Array Controller,Cache Module and Capacitor Temperature information.
WBEM Indications to differentiate memory board errors and DIMM errors.
Version:9.1.0.0 (4 Jun 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new systems in this release as well as cooridnate dual rotor fan support reporting with iLO.
Version:9.0.0.0 (27 Mar 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The HP Insight Management WBEM Providers version 9.0.0.0 contain the following new features: Matrix Identification support and BIOS Auditing.
Version:2.8.0.0 (11 Mar 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Logical disk table is added for SAS disp page
Status Icon issue for SA controller page is fixed
CPU Threshold Indication issue is fixed
Improper use of ThresholdIdentifier property issue is fixed
SATA hotswap is feature is implemented
Common library syncup is done
ILO reset Indiaction provider is implemented
Enhancements to Spinner for 2.8.0
New server and options supported by SS8.70
Version:2.7.0.0 (5 Oct 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Restarting SNMP Agents no longer causes switching Data source to WBEM from SNMP
WebApp SMH is now displaying complete name for SAS HBA
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers). The HP Insight Management WBEM Providers do not work in a virtualized guest environment.
Enhancements to Spinner for 2.7.0
New server and options supported by SS8.60
Addition of McSysProvider support for Integrity
Addition of entry for marketing name for FCoE
Version:2.6.1.0 (21 Jun 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
HP Insight WBEM Providers 2.6.1.0 addresses the following problems:
Latent issues found in the 2.6.0.0 providers support for the HP ProLiant DL580 G7 and the HP ProLiant DL980 G7 servers.
An issue where network providers failed to communicate with some network adapters in systems running Microsoft® Windows® 2008. Note: Customer may still experience an issue where firmware information is not being provided for all network adapters on systems running Microsoft® Windows® 2008 R2 Server Core.
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers).
The HP Insight Management WBEM Providers do not work in a virtualized guest environment.
Version:2.6.0.0 (27 May 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers).
The HP Insight Management WBEM Providers do not work in a virtualized guest environment.
Adding Simple Host Attached Storage Provider [new SATA provider]
Isis/Electra FW version reporting
Version:2.5.0.0 (29 Mar 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers). The HP Insight Management WBEM Providers do not work in a virtualized guest environment. Adding Simple Host Attached Storage Provider [new SATA provider]
Version:2.4.0.0 (14 Sep 2009)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%cpqsystemlog directory under the name CPQSETUP.LOG. The HP Insight Management WBEM Providers do not work in a virtualized guest environment
Version:2.3.2.0 (23 Jun 2009)
Fixes the update status for firmware showing Not Required when queried from Microsoft SCCM even though the update is applicable on clients with the HP Insight Management WBEM Providers version 2.3.0.0 installed.
Version:2.3.0.0 (30 Mar 2009)
HP_PCISlot updated to include PCI Express slot types
Updated to translate SMBIOS enumerations for memory and CPU due to changes introduced in DMTF SMBIOS spec 2.6.1 for G6 servers
Fixed the SMH WebApp to properly set Disk and CPU threshold values
Fixed issue where mulitiple CPU and Disk Threshold indications were getting logged for the same state
Fixed Wrong health status reported in class HP_WinComputerSystem
Changed to use worst of DIMM status for the memory collection to match SNMP
Fixed issue: Event Time not diplayed on POST indication
Fixed issue: Cannot use the HP_RealizesPowerSupply antecedent to getInstance on HP_WinPowerSupply
Fixed issue: Cannot use the HP_RealizesFan antecedent to getInstance on HP_WinFan
Fixed issue: Cannot use the HP_FanInSlot and HP_PowerSupplyInSlot antecedent to getInstance on HP_FanSlot or HP_PowerSupplySlot
Added support for Fibre Channel Controller information and indications
All storage providers now support native x64 operation. Previous versions of the Insight Providers included only 32-bit storage providers.
Added support for SMI-S defined Host Discovered Resource (HDR) profile which provides OS volume information
Added support for nearline tape devices
IPv6 level 4 compliance
SMH v3.x support, including setting SMH data source (WBEM)
SMH data source (WBEM vs SNMP) is now settable via HP SIM 'Replicate Agent Settings'
iLO reset capability via SMH WebApp
Support for OS Status profile
Support for Platform Watchdog profile
State propogation filtering added for power supplies, in addition to previous implementation for NICs and management processor NICs
Added support for SmartArray dual domain and multi-path cabling configuration
Version:2.2.1.0 (15 Sep 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Updated hardware support.
Version:2.2.0.0 (2 Jul 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Updated hardware support.
Version:2.1.1.0 (2 Apr 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Initial release.
Version:2.1.0.0 (25 Feb 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Initial release.
Type:
Software - System Management
Version:
10.30.0.0(1 Oct 2015)
Operating System(s):
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Description
The HP Insight Management WBEM Providers supply system management data through the Windows Management Instrumentation framework for HP ProLiant server platforms and options. The Insight Providers offer industry standard DMTF SMASH profile and SNIA SMI-S profile compliance.
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.10.0.
Installation Instructions
Prerequisites:
The HP Insight Management WBEM Providers version 10.30.0.0 require storage, network, system management controller, and Lights-Out interface drivers from Service Pack for ProLiant 2015.10.0.
In addition, the System Management Homepage (SMH) component is required for a single server web-based user interface.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Place the Smart Component in a temporary directory, then double-click it to run.
Select 'Install' to start extracting to a temporary location on the hard drive.
Click the 'Install' button to perform the installation.
Release Notes
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Revision History
Version:10.75.0.0 (2 Apr 2019)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixed the incorrect System Management Homepage red icon status of Smart Array controllers, if the controller has logical drive(s) created with HPE Smart Storage Administrator version later than 3.10.3.0. Hp laserjet 1018 printer driver windows xp.
Version:10.71.0.0 (27 Nov 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Implemented a workaround to fix errors seen with Hyper-V commands after WBEM Providers are installed under Microsoft Windows Server 2012 R2 and Microsoft Windows Server 2016.
Refer to the following Customer Advisory for more info on the issue and workaround: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00053606en_us
Fixed an application error seen upon querying data from HPE Network WBEM Providers, on systems with Broadcom NIC devices using bmapia.dll.
Version:10.70.0.0 (5 Feb 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixed a handle leak caused by Storage provider (hpwmisa.dll).
Version:10.65.0.0 (12 Jul 2017)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
none
Applied a SHA-256 digital signature to the WBEM Providers MSI file as well as all the binary files contained in it.
Allowed installation to proceed on systems with the Windows Remote Registry service disabled.
Version:10.61.0.0 (21 Apr 2017)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
None
Applied a SHA-256 digital signature to the WBEM Providers MSI file as well as all the binary files contained in it.
Allowed installation to proceed on systems with the Windows Remote Registry service disabled.
Version:10.60.0.0 (24 Oct 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixed the issue with Insight Management WBEM override rootinterop namespace for Hyper-V.
50% slow performance/backup issue with HP Ultrium/LTO polling issues.
Tape backup fails randomly (irrespective of any server or controller/backup software) when HPE Insight Management WBEM Providers is upgraded to version 10.X.
Providers are causing spare drives to be spun up every few minutes.
Added support for Microsoft Windows Server 2016 and other new ProLiant servers and options.
Version:10.40.0.0 (1 Apr 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2016.03.0.
Version:10.30.0.0 (1 Oct 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.10.0.
Version:10.20.0.0 (15 Jun 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.06.
Version:10.10.0.0 (30 Mar 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new ProLiant servers and options that are supported by HP Service Pack for ProLiant version 2015.03.
Added support for HP SUM Version 7.2.
Added verbose logging in Windows.
Version:10.0.0.0 (9 Sep 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enable option to include/exclude Fiber Channel Port status
Host Bus Adapter mode reporting for Smart Array Controllers
Version:9.5.0.0 (18 Feb 2014)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for Unified Extensible Firware Interface Platforms
Encryption status reporting for Smart Array controllers
Version:9.4.0.0 (10 Sep 2013)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Ipv6 for iLo
iSCSI
Version:9.3.0.0 (19 Feb 2013)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
To report Rank,Techonology,Operating and minimum voltage for DIMM's
Version:9.2.5.0 (26 Oct 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for HP Smart Memory and new memory related properties.
Version:9.2.0.0 (4 Sep 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Provider License related information for certain Smart Array cards.
Report Smart Array Controller,Cache Module and Capacitor Temperature information.
WBEM Indications to differentiate memory board errors and DIMM errors.
Version:9.1.0.0 (4 Jun 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for new systems in this release as well as cooridnate dual rotor fan support reporting with iLO.
Version:9.0.0.0 (27 Mar 2012)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The HP Insight Management WBEM Providers version 9.0.0.0 contain the following new features: Matrix Identification support and BIOS Auditing.
Version:2.8.0.0 (11 Mar 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Logical disk table is added for SAS disp page
Status Icon issue for SA controller page is fixed
CPU Threshold Indication issue is fixed
Improper use of ThresholdIdentifier property issue is fixed
SATA hotswap is feature is implemented
Common library syncup is done
ILO reset Indiaction provider is implemented
Enhancements to Spinner for 2.8.0
New server and options supported by SS8.70
Version:2.7.0.0 (5 Oct 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Restarting SNMP Agents no longer causes switching Data source to WBEM from SNMP
WebApp SMH is now displaying complete name for SAS HBA
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers). The HP Insight Management WBEM Providers do not work in a virtualized guest environment.
Enhancements to Spinner for 2.7.0
New server and options supported by SS8.60
Addition of McSysProvider support for Integrity
Addition of entry for marketing name for FCoE
Version:2.6.1.0 (21 Jun 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
HP Insight WBEM Providers 2.6.1.0 addresses the following problems:
Latent issues found in the 2.6.0.0 providers support for the HP ProLiant DL580 G7 and the HP ProLiant DL980 G7 servers.
An issue where network providers failed to communicate with some network adapters in systems running Microsoft® Windows® 2008. Note: Customer may still experience an issue where firmware information is not being provided for all network adapters on systems running Microsoft® Windows® 2008 R2 Server Core.
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers).
The HP Insight Management WBEM Providers do not work in a virtualized guest environment.
Version:2.6.0.0 (27 May 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers).
The HP Insight Management WBEM Providers do not work in a virtualized guest environment.
Adding Simple Host Attached Storage Provider [new SATA provider]
Isis/Electra FW version reporting
Version:2.5.0.0 (29 Mar 2010)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The component installer has been updated to recognize if it is running within a virtualized guest environment (as of version 2.3.0.0 of the HP Insight Management WBEM Providers). The HP Insight Management WBEM Providers do not work in a virtualized guest environment. Adding Simple Host Attached Storage Provider [new SATA provider]
Version:2.4.0.0 (14 Sep 2009)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%cpqsystemlog directory under the name CPQSETUP.LOG. The HP Insight Management WBEM Providers do not work in a virtualized guest environment
Version:2.3.2.0 (23 Jun 2009)
Fixes the update status for firmware showing Not Required when queried from Microsoft SCCM even though the update is applicable on clients with the HP Insight Management WBEM Providers version 2.3.0.0 installed.
Version:2.3.0.0 (30 Mar 2009)
HP_PCISlot updated to include PCI Express slot types
Updated to translate SMBIOS enumerations for memory and CPU due to changes introduced in DMTF SMBIOS spec 2.6.1 for G6 servers
It is strongly recommended you update your Epson Drivers frequently to prevent issues. Drivers may also be manually updated. Epson m188d printer driver windows 8. You can easily download a Driver update tools and run a no cost scan to see if your drivers are up-to-date.
Fixed the SMH WebApp to properly set Disk and CPU threshold values
Fixed issue where mulitiple CPU and Disk Threshold indications were getting logged for the same state
Fixed Wrong health status reported in class HP_WinComputerSystem
Changed to use worst of DIMM status for the memory collection to match SNMP
Fixed issue: Event Time not diplayed on POST indication
Fixed issue: Cannot use the HP_RealizesPowerSupply antecedent to getInstance on HP_WinPowerSupply
Fixed issue: Cannot use the HP_RealizesFan antecedent to getInstance on HP_WinFan
Fixed issue: Cannot use the HP_FanInSlot and HP_PowerSupplyInSlot antecedent to getInstance on HP_FanSlot or HP_PowerSupplySlot
Added support for Fibre Channel Controller information and indications
All storage providers now support native x64 operation. Previous versions of the Insight Providers included only 32-bit storage providers.
Added support for SMI-S defined Host Discovered Resource (HDR) profile which provides OS volume information
Added support for nearline tape devices
IPv6 level 4 compliance
SMH v3.x support, including setting SMH data source (WBEM)
SMH data source (WBEM vs SNMP) is now settable via HP SIM 'Replicate Agent Settings'
iLO reset capability via SMH WebApp
Support for OS Status profile
Support for Platform Watchdog profile
State propogation filtering added for power supplies, in addition to previous implementation for NICs and management processor NICs
Added support for SmartArray dual domain and multi-path cabling configuration
Version:2.2.1.0 (15 Sep 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Updated hardware support.
Version:2.2.0.0 (2 Jul 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Updated hardware support.
Version:2.1.1.0 (2 Apr 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Initial release.
Version:2.1.0.0 (25 Feb 2008)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Initial release.
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
The problem has been discussed in may thread, in the net. I've read most of them but my HP M.H. is still empty. New HP ML 350 G8, fresh installed HP System Management Homepage v7.1.2.3 (after uninstalled and reinstalled the new one - v7.2.0.14) SNMP service running, to be more conservative I've created a readonly community (public) and a write/read community (private). Authorized hosts: localhost - 127.0.0.1 and the true server's IP No trap configured (I've tried also that but with no luck). I've tried to reboot all services involved (smnp then all HP services) I think that the problem may be in the management homepage itsef, I can't change data source, in the the older one it was possible. No firewall running, windows server 2008 r2
Hp Insight Management Wbem Providers Download
What can I have missed? Thank you! No help from HP community, here's the screenshot
